Minneapolis Moline Product List

This information is presented by Steiner Tractor Parts, Inc.  We are pleased to offer the following products for Minneapolis Moline tractors.  Printable Version Available Here!
Steiner Tractor Parts, Inc. is the premier supplier of restoration quality parts for antique tractors.  Check out our company blog for more information on our company and to view pictures from our most recent tractor show.  You can also view the Minneapolis Moline Products on our website.  We strive to provide top quality parts and superb customer service.  Give us a chance to supply the restoration parts you need for your old iron, we’d be glad to help!

OLS064: HEADLIGHT GASKET --- REAR COMBO LIGHT GASKET: Fits Minneapolis Moline Models-R SERIES, U SERIES, Z SERIES, GB, GTB, GVI, 3 STAR, JET STAR 4, 5 STAR, 335, M5, M602, U, Z, G, 355, G1365 - 5 3/4" - OLIVER: 1H7387, CASE: 924409

OLS074: 12-VOLT COMBO RED DOT TAIL LIGHT ASSEMBLY: Fits Minneapolis Moline Models-GB, GTB, GVI, 3 STAR, JET STAR 4, 5 STAR, 335, M5, M602, U, Z, G1355, G1365 - 5 3/4" DIAMETER --- SWITCHES FROM RED TO WHITE - MM:10A15410 & 164109AS --- OLIVER: : 164109AS

OLS053: COMPLETE HEADLIGHT ASSEMBLY --- 6 VOLT: Fits Minneapolis Moline Models-MM R SERIES, U SERIES, Z SERIES - 5 3/4" DIAMETER --- CURVED LENS - OLIVER: KT1360 --- CASE: 6942AB, 9668AB, 09898AB

OLS055: COMPLETE HEADLIGHT ASSEMBLY --- 12 VOLT: Fits Minneapolis Moline Models-MM R SERIES, U SERIES & Z SERIES - 5 3/4" DIAMETER --- CURVED LENS - 10A3750 --- CASE: 6942AB, 9668AB

OLS073: 6-VOLT COMBO RED DOT TAIL LIGHT ASSEMBLY: Fits Minneapolis Moline Models-GB, GTB, GVI, 3 STAR, JET STAR 4, 5 STAR, 335, M5, M602, U, Z, G1355, G1365 - 5 3/4" DIAMETER --- SWITCHES FROM RED TO WHITE - CASE:08810AB &: 09897AB --- MM:10A15410 & 164109AS --- OLIVER:164109AS

OLS062: HEADLIGHT LENS --- REAR COMBO LIGHT LENS: Fits Minneapolis Moline Models-R SERIES, U SERIES, Z SERIES, GB, GTB, GVI, 3 STAR, JET STAR 4, 5 STAR, 335, M5, M602, U, Z, G, 355, G1365 - 5 3/4" DIAMETER CURVED LENS --- WITH GUIDE NAME --- MADE IN THE USA -

JDS666: COMBINATION SWITCH ONLY (IGNITION & LIGHT): Fits Minneapolis Moline Models-SOME U, UB GAS, UTS GAS, R SERIES, Z SERIES, ZA SERIES, ZB SERIES, ZAS - 5 SCREW TYPE TERMINALS --- 6-VOLT & 12-VOLT --- WITHOUT LEVER - JD: AM1866T, AA5071R --- MM: 10A971, 10A2071, 10A3749 --- OLIVER: 1K7354 & 1K7354A

WHS052: TIRE: Fits Minneapolis Moline Models-MM MODELS - 5.00 X 15 TIRE ONLY --- TRIPLE RIB 4 PLY --- FOR 3 X 15 WHEEL -

WHS047: TIRE ONLY: Fits Minneapolis Moline Models-MM MODELS - 5.50 x 16" --- TRIPLE RIB --- 6 PLY -

MIS089: CHAIN HOOK: Fits Minneapolis Moline Models-MM MODELS - 5/16" -

JDS535: SCREEN W/ CLIP & 2 SPRINGS FOR PRESCREENER: Fits Minneapolis Moline Models-G955 - 5-1/4" X 19-3/8" - JD: AR21790R --- IH: 378724RA, 378724R91 --- COCKSHUTT: 3119373 --- MM: 101968AS --- OLIVER: 101968AS

JDS540: AIR CLEANER INNER OIL CUP: Fits Minneapolis Moline Models-ALL GAS: ZA, ZAU, ZAE, ZAN, ZAS, ZBE, ZBN, ZBU, 3 STAR, 4 STAR, JETSTAR, JETSTAR 3, JETSTAR 4, JETSTAR 3 SUPER, 445 - 5-3/8" I.D. - JD:AM468T &: AM465T --- COCKSHUTT: T7032 --- IH: 52864DA, 362974R91, 375550R91, 378333R1 --- MH: 1001012M91 --- MF: 1754014M1 --- 10P31

ABC523: OIL PRESSURE GAUGE COPPER LINE KIT: Fits Minneapolis Moline Models-MOST MODELS USING 1/8 " X 6 FT COPPER OIL LINE - 6 FT COPPER 1/8" LINE --- KIT INCLUDES : (2) 5/16 - 24 UNFNVT, (2) COMPRESSION SLEEVES, (1) 1/8 - 27 NPTF FEMALE TO 5/16" - 24 UNF MALE ADAPTER, (1) 1/8 - 27 NPTF FEMALE TO 1/4" - 1/8" NPTF MALE BUSHING --- NOTE: DEPENDING ON APPLICATION CUSTOMER MAY HAVE TO PURCHASE OTHER FITTINGS -

IHS354: 6V LIGHT BULB: Fits Minneapolis Moline Models-MM R SERIES, U SERIES, Z SERIES - 6 VOLT --- INTERCHANGEABLE WITH ORIGINAL --- FITS AS A HEADLIGHT OR A REAR COMBO LIGHT BULB - IH:142309

ABC464: SERIAL # TAG RIVET: Fits Minneapolis Moline Models-MM MODELS - 6 X 3/8 --- USA MADE -

WHS022: 4.5" X 16" (6 LUG) FRONT WHEEL: Fits Minneapolis Moline Models-MM MODELS 335 & UP - 6" CIRCLE WITH 4.62" PILOT 2500 LB CAPACITY FOR 5.50 x 6.00 x16" TIRES TO DETERMINE BACKSPACING, LAY THE WHEEL FLAT ON THE GROUND WITH THE BACK OF WHEEL FACING UP. NEXT, LAY A STRAIGHTEDGE ACROSS WHEEL AND MEASURE THE DISTANCE FROM THE BACK SIDE OF MOUNTING SURFACE TO THE STRAIGHTEDGE. BACKSPACING = 4" - FORD:8N1015D

WHS042: FRONT WHEEL: Fits Minneapolis Moline Models-MM MODELS 335 & UP - 6" x 15", 6 LUG PILOT HOLE = 4.625" 6" BOLT CIRCLE USA MADE TO DETERMINE BACKSPACING, LAY THE WHEEL FLAT ON THE GROUND WITH THE BACK OF WHEEL FACING UP. NEXT, LAY A STRAIGHTEDGE ACROSS WHEEL AND MEASURE THE DISTANCE FROM THE BACK SIDE OF MOUNTING SURFACE TO THE STRAIGHTEDGE. BACKSPACING = 4.75" -

WHS043: FRONT WHEEL: Fits Minneapolis Moline Models-MM MODELS 335 & UP - 6" x 16", 6 LUG PILOT HOLE = 4.625" 6" BOLT CIRCLE USA MADE TO DETERMINE BACKSPACING, LAY THE WHEEL FLAT ON THE GROUND WITH THE BACK OF WHEEL FACING UP. NEXT, LAY A STRAIGHTEDGE ACROSS WHEEL AND MEASURE THE DISTANCE FROM THE BACK SIDE OF MOUNTING SURFACE TO THE STRAIGHTEDGE. BACKSPACING = 4.75" -

WHS048: TIRE ONLY: Fits Minneapolis Moline Models-MM MODELS - 6.00 x 16" --- TRIPLE RIB --- 4 PLY -

WHS049: TIRE ONLY: Fits Minneapolis Moline Models-MM MODELS - 6.50 x 16" --- TRIPLE RIB --- 6 PLY -

ABC307: 7" HEADLIGHT FLAT LENS: Fits Minneapolis Moline Models-MM MODELS - 7" -

ABC312: 7" HEADLIGHT RING: Fits Minneapolis Moline Models-MM MODELS - 7" -

WHS056: TIRE: Fits Minneapolis Moline Models-MM MODELS - 7.50 X 18, 6 PLY --- SAYS "OLD STYLE" RIGHT IN THE TIRE --- HAS THE OLD STYLE APPEARANCE -

MIS119: 3 PT LYNCH PIN: Fits Minneapolis Moline Models-MM MODELS - 7/16" DIA PIN --- 1-3/4" USEABLE LENGTH --- 1-5/8" DIA RING -

AVS001: MANIFOLD: Fits Minneapolis Moline Models-V - 8 5/8" C.C. OUTSIDE HOLES --- 12 1/4" OVERALL - VT149

WHS044: FRONT WHEEL: Fits Minneapolis Moline Models-MM MODELS 335 & UP - 8" x 15", 6 LUG PILOT HOLE = 4.625" 6" BOLT CIRCLE USA MADE TO DETERMINE BACKSPACING, LAY THE WHEEL FLAT ON THE GROUND WITH THE BACK OF WHEEL FACING UP. NEXT, LAY A STRAIGHTEDGE ACROSS WHEEL AND MEASURE THE DISTANCE FROM THE BACK SIDE OF MOUNTING SURFACE TO THE STRAIGHTEDGE. BACKSPACING = 5.75" -

WHS045: FRONT WHEEL: Fits Minneapolis Moline Models-VARIOUS MODELS 335 AND UP - 8" x 16", 6 LUG PILOT HOLE = 4.625" 6" BOLT CIRCLE USA MADE TO DETERMINE BACKSPACING, LAY THE WHEEL FLAT ON THE GROUND WITH THE BACK OF WHEEL FACING UP. NEXT, LAY A STRAIGHTEDGE ACROSS WHEEL AND MEASURE THE DISTANCE FROM THE BACK SIDE OF MOUNTING SURFACE TO THE STRAIGHTEDGE. BACKSPACING = 4.75" THIS IS A WHEEL THAT IS DIFFERENT THAN ORIGINAL IT FITS MOST MODELS IF THE CUSTOMER ISNT CONCERNED ABOUT LOOKS -

ABC397: RIM LUG BOLT: Fits Minneapolis Moline Models-REAR: R, U, Z, ZA, ZB, JET STAR, JET STAR 2, JET STAR 3, JET STAR 4, 335, 445, M400, U302 --- FRONT: GB, GTB, GBI, G-1000, G-1050, G-1350 - 9/16" X 18 THREAD --- 1 1/8" LONG THREAD --- 7/8" HEX HEAD --- ALSO USED AS FRONT BOLT ON SOME APPLICATIONS - AC: 225191 & 251815 --- CASE: 030739HT --- COCKSHUTT: FX07 --- IH: 51485D --- JD: JD16R, JD21, AA4173R, AT11920, T21544, T23252 --- MASSEY: 15597A, MPI584, 518611M91, 519278M91 --- WHITE / OLIVER: 1H706A

MIS108: REAR SPINOUT RIM STOP: Fits Minneapolis Moline Models-MM MODELS - 90 DEGREE DRILLED RIM RAIL -

MIS124: STEINER TRACTOR PARTS, INC. BASEBALL CAP, GOLD/YELLOW MESH CAP: Fits Minneapolis Moline Models-MM MODELS - A GREAT WAY TO SHOW YOUR FELLOW TRACTOR ENTHUSIASTS THAT YOU ARE A PART OF "TEAM STEINER!". EACH HAT IS MADE OF DURABLE COTTON WITH REAL EMBROIDERY. INCLUDES STEINER NAME IN RAISED LETTER, SLOGAN, AND CONTACT INFORMATION. GOLD/YELLOW MESH W/RED EMBROIDERY -

ABC400: UNIVERSAL 4-TERMINAL STARTER SWITCH WITH 2 KEYS: Fits Minneapolis Moline Models-MM MODELS - AG AND LIGHT INDUSTRIAL EQUIPMENT --- 3/4" DIAMETER THREAD, FOUR TERMINALS --- 4 POSITION SWITCH, HAS 4 STUD TERMINALS -

FDS149: SPARK PLUG WIRING SET (4 CYLINDER): Fits Minneapolis Moline Models-MINNEAPOLIS MOLINE 4 CYLINDER MODELS - ALL 4 CYLINDER MODELS --- WATERPROOF NEOPRENE --- 90 DEGREE BOOTS --- CUT TO LENGTH --- NOTE: CAN BE USED WITH ELECTRONIC IGNITION CONVERSION KITS -

MIS091: DRAWBAR CLEVIS HOOK: Fits Minneapolis Moline Models-MM MODELS - ALL TRACTOR DRAWBARS WITH 3/4" HOLES UP TO AND INCLUDING 1 1/4" THICK. USE WITH CHAIN SIZES 5/16" TO 1/2", INCLUDING HIGH TEST CHAIN. PIN #30835 IS FORGED AND TREATED. -

FDS081: AIR CLEANER CLAMP: Fits Minneapolis Moline Models-335 GAS - ALL W/ DONALDSON AIR CLEANER - AC: 228480 --- FORD: 311508 --- IH: 66357DA --- JD: AH774R --- MH: 15790A --- MF: 15203A --- OLIVER: 1B6058A --- CASE: G45011 -- MM: 10P831

MIS103: STEERING WHEEL SPINNER: Fits Minneapolis Moline Models-MM MODELS - ALUMINUM -

MM201: I & T SHOP SERVICE MANUAL: Fits Minneapolis Moline Models-GB SERIES, UB, ZB, 335 SERIES, 445, JET STAR, JET STAR II, JET STAR III, STAR 4, 4 STAR SUPER, U-3 IV02, UB SPECIAL SERIES, UTS SPECIAL STAR 5, M5, M504, M602, M604, M670, SUPER M670, G-VI SERIES , G-705, G-706, G-707, G-708, G-900, G-950, G-1000, G-1000 VISTA, G-1050, G-1350, R, U, Z, A, ZT - AN I & T TRACTOR MANUAL TELLS YOU HOW TO TAKE A TRACTOR APART, HOW TO FIX IT AND HOW TO PUT IT BACK TOGETHER AGAIN. THESE ARE AUTHENTIC MANUALS THAT DEAL WITH REPAIRS IN THE LANGUAGE OF A MECHANIC WITH A EASY TO USE FORMAT. THEY INCLUDE VALUABLE INFORMATION AS TO SPECIFICATIONS, TORQUES,ETC. ILLUSTRATED BY EXPLODED VIEWS AND PHOTOS. IF YOU ARE IN SERIOUS REPAIRS OR RESTORATION, YOU NEED AN I & T SHOP SERVICE MANUAL. IT WILL OFFER MANY SHORT CUTS AND SAVE YOU TIME. -

O202: I&T SHOP SERVICE MANUAL: Fits Minneapolis Moline Models-G-550, G750, G-850, G-940 SERIES, G-955, G1355 - AN I & T TRACTOR MANUAL TELLS YOU HOW TO TAKE A TRACTOR APART, HOW TO FIX IT AND HOW TO PUT IT BACK TOGETHER AGAIN. THESE ARE AUTHENTIC MANUALS THAT DEAL WITH REPAIRS IN THE LANGUAGE OF A MECHANIC WITH A EASY TO USE FORMAT. THEY INCLUDE VALUABLE INFORMATION AS TO SPECIFICATIONS, TORQUES,ETC. ILLUSTRATED BY EXPLODED VIEWS AND PHOTOS. IF YOU ARE IN SERIOUS REPAIRS OR RESTORATION, YOU NEED AN I & T SHOP SERVICE MANUAL. IT WILL OFFER MANY SHORT CUTS AND SAVE YOU TIME. -

MM2AR: OPERATOR'S & MAINTENANCE MANUAL: Fits Minneapolis Moline Models-AR - AN OPERATORS MANUAL (REPRINTS ONLY) SOMETIMES REFERRED TO AS THE OWNER'S MANUAL IS THE MANUAL THAT CAME WITH THE TRACTOR. IT IS THE MANUAL THAT WAS GIVEN TO THE ULTIMATE CONSUMER BY THE MANUFACTURER. IT CAN BE COMPARED TO THE MANUAL YOU RECEIVE IN THE GLOVE BOX OF A NEW CAR. THIS MANUAL GIVES THE OWNER-OPERATOR INSTRUCTIONS, SHIFT PATTERNS, CAPACITIES (ANTI-FREEZE, CRANKCASE, ETC) AND ADJUSTMENT PROCEDURES (BRAKES, CLUTCH, ETC) THIS IS A VERY USEFUL AND VALUABLE TOOL IN OPERATING YOUR TRACTOR -

ABC422: FILTER ELEMENT, OIL BATH AIR CLEANER: Fits Minneapolis Moline Models-MM MODELS - APPROXIMATELY: 3" WIDE X 78" LONG PER BAG --- USES 2 BAGS FOR UTILITY TRACTORS --- ALL BRANDS -

ABC371: UNIVERSAL TIE ROD BOOT: Fits Minneapolis Moline Models-MM MODELS - BASE x HEIGHT x HOLE I.D. --- 1.300 X .965 X .500 -

ABC369: UNIVERSAL TIE ROD BOOT: Fits Minneapolis Moline Models-MM MODELS - BASE x HEIGHT x HOLE I.D. --- 1.575 BASE X .600 TALL X .650 HOLE -

ABC368: UNIVERSAL TIE ROD BOOT: Fits Minneapolis Moline Models-MM MODELS - BASE x HEIGHT x HOLE I.D. --- 1.675 X .900 X .625 - AC: 2246799, 71115779, 209697, 209698

ABC370: UNIVERSAL TIE ROD BOOT: Fits Minneapolis Moline Models-MM MODELS - BASE x HEIGHT x HOLE I.D. --- 1.800 X .765 X .740 - AC: 223558, R28019, R40589

ABC512: PRECLEANER CAP ASSEMBLY INCLUDES 7" BOWL: Fits Minneapolis Moline Models-2 1/2" I.D. BASE - BLACK --- 2 1/2" I.D. BASE - CASE A24391 --- JOHN DEERE AR26811 OLD # AR27041, AR28586, AR34166 --- INTERNATIONAL 365262R91

MMS029: OIL PRESSURE GAUGE WITH MM LOGO: Fits Minneapolis Moline Models-RTV, RTS, RTN, STE, G, GTB, GTBD, GTC, RT, RIT, R, Z, ZA, ZAS, ZAN, ZAE, ZATV, ZTN, ZTS, ZTI, ZAU, ZB, ZBE, ZBN, ZBU, ZM, GTA, GBD, GBKP, GB, GT, U, UV, UTI, UTS, UT, UDU, UBN, UBND, UBU, UBUD, UBD, UBD, UBED, UBG, UDS, UTSD, UTC, UTE, UTN, UTSDM, UTU, BIG MO 400, BIG MO 500, BIG MO 600, JETSTAR, 335, 445 - BLACK BEZEL - JT854, 10A7986, 30-3485471

MMS027: AMMETER GAUGE WITH MM LOGO: Fits Minneapolis Moline Models-ALL LETTER SERIES OF G, R, U, Z & FOLLOWING W/O GAUGE CLUSTER BIG MO 400, 500, 600, JETSTAR, 335, 445 - BLACK BEZEL --- 30-30 RANGE - BE455A, 10A8171, 30-3485560

MMS031: WATER TEMPERATURE GAUGE WITH MM LOGO: Fits Minneapolis Moline Models-FOLLOWING 4 CYLS ALL SERIES OF SOME G, R, U, Z & FOLLOWING W/O GAUGE CLUSTER BIG MO 400, 500, 600, JETSTAR, 335, 445 - BLACK BEZEL --- 38" CAPILLARY LINE --- MEASURE OLD ONE BEFORE ORDERING. --- HAS MM LOGO - 10A2229, 10A2794, 30-3485587

ABC466: AMMETER (AMP) GAUGE, 60-0-60: Fits Minneapolis Moline Models-MM MODELS - BLACK BEZEL --- FITS MOST TRACTORS EQUIPPED WITH ALTERNATOR --- FITS A 2" DIAMETER HOLE -

ABC336: 6-VOLT HEADLIGHT ASSEMBLY W/ --- 7" FLAT LENS: Fits Minneapolis Moline Models-EARLY Z, R SERIES - BLACK PRIMER PAINT - JD:AB3144R --- CASE: VT2615

MMS018: SERIAL NUMBER TAG w/RIVETS: Fits Minneapolis Moline Models-U, UB, ZB, 335, 445, OTHER MODELS - BLANK --- ANODIZED ALUMINUM --- 5" L x 2-3/4" H --- 4 RIVET HOLES --- WILL WORK FOR ENGINE OR TRANSMISSION SERIAL NUMBERS -

MMS020: SERIAL NUMBER TAG w/RIVETS: Fits Minneapolis Moline Models-U, UB, Z, RTU, RTE, OTHER MODELS - BLANK --- ANODIZED ALUMINUM --- 5" L x 2-3/4" H --- 4 RIVET HOLES --- WILL WORK FOR ENGINE OR TRANSMISSION SERIAL NUMBERS -

ABC484: SMALL PRECLEANER BOWL (CLEAR PLASTIC): Fits Minneapolis Moline Models-2 STAR & OTHER MM MODELS - BOWL O.D. AT TOP = 5.5" --- BOWL O.D. AT BOTTOM = 5" --- MEASURE BEFORE ORDERING! - AC: 233663 --- FORD: B9NN9A663A --- JD: AM3772T --- MM: 15P512 --- OLIVER: 101580A, 15P512

ABC039: SEDIMENT BOWL GASKET: Fits Minneapolis Moline Models-MM 335, JET STAR 3, 3 STAR, JET STAR 4, 5 STAR, M5, M602, M670 - BOWL TO BODY = 2" O.D. - AC: 208362 --- JD: 208362 --- IH: 360679R1 --- COCKSHUTT: 12081G --- MF: 180060M1 --- FORD: NAA9160A

ABC506: STARTER OR SOLENOID TERMINAL REPAIR STUD: Fits Minneapolis Moline Models-TRACTORS USING 5/16 X 24 FINE THREAD STARTER TERMINALS - BRASS---5/16 X 24 FINE THREAD -

ABC424: CARBURETOR TO MANIFOLD MOUNTING GASKET (MARVEL SCHEBLER): Fits Minneapolis Moline Models-LATE UB, 5 STAR, M5, M602, M604, M670 - CARBURETORS 2-11/16" C.C. BOLT HOLES, 1-1/2" CENTER HOLE --- CHECK MEASUREMENTS BEFORE ORDERING -

ABC416: CARBURETOR TO MANIFOLD MOUNTING GASKET (MARVEL SCHEBLER): Fits Minneapolis Moline Models-U, UB, UTS - CARBURETORS 2-3/8"C.C BOLT HOLES, 1-1/4" CENTER HOLE --- CHECK MEASUREMENTS BEFORE ORDERING -

CKS117: CAP - FUEL OR OIL FILL: Fits Minneapolis Moline Models-R SERIES, U SERIES, Z SERIES - CASE: FUEL TANK CAP & AUXILIARY FUEL TANK CAP. MOLINE: FUEL TANK CAP. FERGUSON/MF: OIL FILL CAP - CASE: G13271 --- FERGUSON: 760029M1 --- MM: TY442

DEC226: MYLAR DECAL SET: Fits Minneapolis Moline Models-4 STAR (BLACK) - CAUTION: INSPECT ALL DECAL PIECES BEFORE APPLYING TO TRACTOR. NO REFUNDS ON MYLAR DECALS IF APPLIED TO SURFACE AND / OR IF DAMAGED. NO REFUNDS ON VINYL CUT DECALS. STORE IN A COOL, DRY PLACE. DO NOT SOAK IN WATER. --- DETAILED APPLICATION INSTRUCTIONS ARE INCLUDED -

DEC227: MYLAR DECAL SET: Fits Minneapolis Moline Models-4 STAR SUPER (RED) - CAUTION: INSPECT ALL DECAL PIECES BEFORE APPLYING TO TRACTOR. NO REFUNDS ON MYLAR DECALS IF APPLIED TO SURFACE AND / OR IF DAMAGED. NO REFUNDS ON VINYL CUT DECALS. STORE IN A COOL, DRY PLACE. DO NOT SOAK IN WATER. --- DETAILED APPLICATION INSTRUCTIONS ARE INCLUDED -

DEC343: MYLAR DECAL SET: Fits Minneapolis Moline Models-5 STAR (BLACK) - CAUTION: INSPECT ALL DECAL PIECES BEFORE APPLYING TO TRACTOR. NO REFUNDS ON MYLAR DECALS IF APPLIED TO SURFACE AND / OR IF DAMAGED. NO REFUNDS ON VINYL CUT DECALS. STORE IN A COOL, DRY PLACE. DO NOT SOAK IN WATER. --- DETAILED APPLICATION INSTRUCTIONS ARE INCLUDED -

OLS128: AMP GAUGE: Fits Minneapolis Moline Models-G750 - CHROME BEZEL - 158583A

IHS647: 12-VOLT SEALED-BEAM HEADLIGHT ASSEMBLY: Fits Minneapolis Moline Models-MM MODELS JET STAR & UP - COMES W/ SEALED BEAM BULB #4411 & RUBBER TRIM RING --- FOR FLAT TOP FENDERS --- NOTE: POST IS OUT OF BACK W/ WIRES THRU POST - AC:267185

ABC333: IGNITION TUNE-UP KIT: Fits Minneapolis Moline Models-JET STAR, 302, G900, G1000, M670, U302 - DELCO DISTRIBUTORS WITH SCREW HELD CAP --- KIT CONTAINS: HEAVY DUTY POINT SET, VIBRATION RESISTANT CONDENSOR & ROTOR - MM DIST: : 1112642 OR 1112671

ABC276: DISTRIBUTOR CAP: Fits Minneapolis Moline Models-BF, G, R, RTU, Z, ZA, ZB, GB, GTB, 4 STAR, 5 STAR, U, UB, U, UTS, UTU, 335, 445, M5, M602 & M604 WILL ALSO FIT JET STAR & JET STAR 3 WITH DISTRIBUTOR #1112606 - DELCO REMY DISTRIBUTORS MUST HAVE CLIP HELD CAP THRU 1963 - AC: 225733 --- DELCO: 811735 --- CASE: 811735 --- COCKSHUTT: MA0-595 --- MF: 1750411M91 --- OLIVER: H7406

ABC359: 12 VOLT BULB: Fits Minneapolis Moline Models-MM MODELS - DOUBLE CONTACT --- WILL FIT O.E.M. 5-3/4" 6-VOLT & 12-VOLT -

ABC358: 6 VOLT BULB: Fits Minneapolis Moline Models-MM MODELS - DOUBLE CONTACT --- WILL FIT O.E.M. 5-3/4" 6-VOLT & 12-VOLT HEADLAMPS. -

ABC042: 1 PIECE OIL FILL/ BREATHER CAP: Fits Minneapolis Moline Models-MM MODELS - ECONOMY STYLE --- IF ORIGINAL STYLE IS NEEDED PLEASE SEE JDS500 - 8N6766B

IHS740: POWER STEERING PRIORITY FLOW CONTROL VALVE: Fits Minneapolis Moline Models-MM MODELS WITH LIVE HYDRAULICS - ELIMINATES BELT DRIVEN PUMP, PULLEYS & BRACKETS. ENABLES YOU TO USE YOUR LIVE HYDRAULIC PUMP TO OPERATE THE POWER STEERING. --- MUST BE USED W/ LIVE HYD. --- 3/4" INLET & RETURN --- 1/2" PRESSURE PORT -- PRE SET AT 1500 PSI, ADJUST TO YOUR APPLICATION -

ABC233: UNIVERSAL 2-TERMINAL STARTER SWITCH & ETHER SWITCH: Fits Minneapolis Moline Models-MM MODELS - EXTRA HEAVY DUTY MOMENTARY PUSH BUTTON SWITCH --- DEPRESS BUTTON: ON --- SPRING RETURN: OFF --- 2 SCREW TERMINAL --- UP TO 35 V DC --- RUBBER CAP FOR DUST & MOISTURE PROTECTION --- MOUNTING STEM 5/8" --- 32 THREAD --- 21/32" LONG - AC:253322, 240962, 245866, 245936 --- IH: 366317R93

IHS685: STEERING WHEEL NUT: Fits Minneapolis Moline Models-335,445, 4 STAR, 4 STAR SUPER, JETSTAR, 5 STAR, M5, M504, M602, M604, G705, G706 - FINISH BARE DIMENSIONS 3/4 X 16 - IH: 219753, 122403, 114499 --- MM: GM219753 5 0A5005 --- OLIVER: S170, 915090, 72162485 --- CASE: 25-1512 --- JD: 14H482, 14H798, 14H904 --- MF: 353435X1

ABC501: 18 HOLE STEEL SEAT PAN: Fits Minneapolis Moline Models-ZTU, ZTN TO SERIAL # 562489 - FINISH PAINTED RED 1/2" SINGLE BOLT HOLE, 17 1/2" WIDE PAN, 13 1/2 " DEEP - AC U-145, 200145 IH MB488B, CASE 01983AB, MM JT560

ABC420: DISTRIBUTOR CAP, 6 CYL, DELCO SCREW HELD: Fits Minneapolis Moline Models-G900, G950, G1000, G1050, G1350 - FITS LISTED MODELS WITH SCREW HELD CAP - DELCO: 1960810 --- MF: 1033100MR1 --- OLIVER: 156356AS --- MM: 10P3023

MMS001: MANIFOLD, EXHAUST: Fits Minneapolis Moline Models-U, UB, UTS GAS & (G W / PURCHASE OF STP #MMS013 INTAKE MANIFOLD) - FITS MM G WITH PURCHASE OF STP# MMS013 INTAKE MANIFOLD --- 2 BOLTS ATTACH EXHAUST TO INTAKE - KE821G

OLS137: RUBBER DUST COVER FOR TILT STEERING WHEEL: Fits Minneapolis Moline Models-JET STAR 3, JET STAR 3 SUPER, M670, G900, G955, G1000, G1050, G1350, G1355 - FITS MODELS LISTED WHEN UPDATED TO CHAR-LYNN STEERING ORBIT MOTOR - 30-3346595

ABC490: IN-LINE FUEL FILTER: Fits Minneapolis Moline Models-MM MODELS - FITS MODELS USING 3/8" FUEL LINES. MUST SPLICE FUEL LINE TO USE. INCLUDES HOSE & CLAMPS. USE TO HELP KEEP RUST & DIRT OUT OF THE CARBURETOR. -

ABC470: PRECLEANER CAP ASSEMBLY: Fits Minneapolis Moline Models-MM MODELS - FITS ONLY MODELS WITH 3" O.D. PIPE, 7" DIAMETER PLASTIC BOWL -

MMS030: STEERING WHEEL MEDALLION WITH O-RING: Fits Minneapolis Moline Models-GVI, G1000, G1050, G1350, JET STAR 3, 4 STAR, M5, M504, M602, M604, M670, G705, G706, G707, G708 - FITS STEERING WHEEL # 10A14456 STP P/N MMS028 - OLD: 10A15590, 10A14434, 10A22902 (MEDALLION), 10A14477 (O-RING), --- NEW: 20-0007864, 20-0007928

ABC510: PRECLEANER CAP ASSEMBLY INCLUDES 10 1/2" BOWL: Fits Minneapolis Moline Models-FITS TRACTORS WITH 4" I.D. BASE - FITS TRACTORS WITH 4" I.D. BASE --- BLACK - AC 249775, OLD # 1281952, 1306484

ABC008: RADIATOR CAP: Fits Minneapolis Moline Models-V, 4 STAR, SUPER 4 STAR, 5 STAR, JET STAR, JET STAR 3, M5, M602, M604, M670, U302, 335, G900, G1000 - FOR 1.500" RADIATOR NECK I.D. --- LIKE ORIGINAL --- FOR 4PSI PRESSURIZED SYSTEMS --- FOR MANY MODELS, MAY NOT LOOK LIKE ORIGINAL, BUT WORKS GREAT! - CASE: G45179 --- FORD: 1T8100A2, 2N8100A, ECON8100AA --- OLIVER: 155611A, 30-3225917, 15239A --- MM: 10P689, 10A10056 --- MH: 18329A, 850876M91 --- INTERNATIONAL: 404684R1

WHS053: TUBE ONLY: Fits Minneapolis Moline Models-MM MODELS - FOR 4.00, 5.00, 5.50 X 15" TIRES -

IHS355: HEADLIGHT GASKET: Fits Minneapolis Moline Models-MM MODELS - FOR 4-1/2" LIGHT ASSEMBLY - JD: AA3239R --- IH: 53527D

WHS050: TUBE ONLY: Fits Minneapolis Moline Models-MM MODELS - FOR 5.50, 6.00, 6.50 x 16" TIRES -

ABC330: DISTRIBUTOR CAP: Fits Minneapolis Moline Models-GVI, G705, G706, G707, G708 - FOR 6 CYLINDER MODELS --- WITH DELCO REMY DISTRIBUTORS --- WITH CLIP HELD CAP - AC:74042704 --- DELCO:824735 --- CASE:824735 &: MA756 --- WHITE: K7406 --- MM:19P3031 --- COCKSHUTT: MAO-602

ABC186: DISTRIBUTOR DUST COVER WITH FELT GASKET & WASHER: Fits Minneapolis Moline Models-W/ DELCO DIST, 2, 2A, 2B, V, VTS, VB, VTV, G, GB, GTB, R, RTV, GVI, G705, G706, G707, G708 - FOR EARLY DELCO REMY DISTRIBUTOR WITH CLIP HELD CAP - AC: 225734, DELCO: 1900119 --- COCKSHUTT: MA0-602 --- MF: 1750491M91 --- OLIVER: H7413 --- DELCO: 1900119

IHS626: OIL GAUGE FITTING: Fits Minneapolis Moline Models-BF, BG, GB, GVI, GTA, GTB, GTC, R, RT, RTE, RTN, RTS, RTU, U, UT, UTC, UTS, UTU, UTN, UTE, UB, UB SPECIAL, UBE, UBG, UBU, UBN, Z, ZTN, ZTS, ZTU, ZAE, ZAN, ZAS, ZAU, ZBE, ZBU, ZM, ZBN, 335, 445, R STAR, 5 STAR, JETSTAR, & OTHER MODELS USING A MECHANICAL GAUGE - FOR GAUGES WITHOUT REMOVABLE FITTING --- 1/8" PIPE TO 1/4" TUBE - IH: 29898D

ABC141: DISTRIBUTOR CAP: Fits Minneapolis Moline Models-MM M670, U302, LATE JET STAR 3, 3 STAR (4-CYLINDER) - FOR LISTED 4 CYLINDER MODELS --- FOR DELCO DISTRIBUTOR W/ SCREW HELD CAP - DELCO: 1960833 --- JD:R11257 --- MM:10P3022

ABC345: TAIL LIGHT BULB --- 12 VOLT: Fits Minneapolis Moline Models-MM JET STAR, 4 STAR, 5 STAR, 445, BIG MO 400, BIG MO 500, BIG MO 600 - G-6, SINGLE CONTACT --- BAYONETTE BASE --- .59 AMPS - 67, AD2835R SUBS AD1855R, AD2082R, ADAD2834R, AR1563R, AR20447R, AR26757R, AR33479R, AR35993R, B1728R, RE13195R

ABC344: TAIL LIGHT BULB --- 6 VOLT: Fits Minneapolis Moline Models-MM JET STAR, 4 STAR, 5 STAR, 445, BIG MO 400, BIG MO 500, BIG MO 600 - G-6, SINGLE CONTACT --- BAYONETTE BASE --- .63 AMPS - 63, AD2835R SUBS AD1855R, AD2082R, ADAD2834R, AR1563R, AR20447R, AR26757R, AR33479R, AR35993R, B1728R, RE13195R

ABC401: BATTERY CABLE: Fits Minneapolis Moline Models-MM MODELS - GROUND CABLE NON-INSULATED. --- 2 GAUGE, LENGTH = 6" --- HEAVY DUTY STRAIGHT TERMINALS --- WHILE WE DEAL WITH A SUPPLY ISSUE, THIS MAY BE A 2 GAUGE CABLE. -

ABC403: BATTERY CABLE: Fits Minneapolis Moline Models-MM MODELS - GROUND CABLE, NON-INSULATED --- HEAVY DUTY STRAIGHT TERMINALS --- 2 GAUGE, LENGTH = 24" -

ABC411: BATTERY CABLE: Fits Minneapolis Moline Models-MM MODELS - GROUND CABLE, NON-INSULATED --- HEAVY DUTY, STRAIGHT TERMINALS --- 2 GAUGE, LENGTH = 9" --- WHILE WE DEAL WITH A SUPPLY ISSUE, THIS MAY BE A 2 GAUGE CABLE. -

IHS352: 4-3/4" CURVED LENS WITH "GUIDE" NAME: Fits Minneapolis Moline Models-MM MODELS - HAS GUIDE NAME --- INTERCHANGEABLE WITH THE ORIGINAL - JD:A2731R --- IH:53521D & 350478R1

ACS228: SPARK PLUG WIRING SET, 4 CYL: Fits Minneapolis Moline Models-BF, BG, GTA, GTB, GTC, GB, R, RT, RTE, RTN, RTS, RTU, U, UT, UTC, UTS, UTU, UTN, UTE, UB, UB SPECIAL, UBE, UBG, UBU, UBN, Z, ZTN, ZTS, ZTU, ZAE, ZAN, ZAS, ZAU, ZBE, ZBU, ZM, ZBN, 335, 445, 4 STAR, 5 STAR, JETSTAR, JETSTAR 3, U302, M5, M504, M602, M604, M670 & OTHER MODELS USING STRAIGHT BOOTS - HAS STRAIGHT BOOTS --- COPPER WIRES, WATERPROOF NEOPRENE -

IHS555: TORQUE GENERATOR: Fits Minneapolis Moline Models-MODELS USING 7/8" DIAMETER STEERING SHAFT - HEAVY DUTY IF ONLY USING THIS PIECE, ALSO NEED PORT BLOCK, IHS673 FOR WHEN A FRONT LOADER IS USED TORQUE OUTPUT AT 1000 PSI = 1100 IN LBS RATED OPERATING PRESSURE = 1000 PSI MAX. OPERATING SPEED AT 3 GPM = 65 RPM RECOMMENDED FLUID INPUT = 3 TO 4 GPM 7/8" SHAFT -

ABC421: BATTERY CABLE: Fits Minneapolis Moline Models-MM MODELS - HEAVY DUTY, STRAIGHT TERMINALS --- GROUND CABLE, NON-INSULATED --- 2 GAUGE, LENGTH = 19" -

ACS139: 3 POSITION LIGHT SWITCH: Fits Minneapolis Moline Models-UTA - HI-LO-CHARGE --- HI CHARGE WITH LIGHTS --- .800 DIAMETER THREADED END - AC: 208197 --- COCKSHUTT: TO7524 --- JD: AB2687R, AF687R, AL2857T --- MH: 851674M1, 850449M1, 15199A, 837078M91, --- VTA463